GORE® Joint Sealant, 30 ft Length, 3/4 in Width, -452 to 600 deg F, 145 psi, Material Construction: PTFE
| Length |
: |
30 ft |
| Material |
: |
PTFE |
| Material Construction |
: |
PTFE |
| Pressure Rating |
: |
145 psi |
| Product Type |
: |
Joint Sealant |
| Temperature Rating |
: |
-452 to 600 deg F |
| Width |
: |
3/4 in |
GORE® joint sealant is versatile and easy-to-install, this 100% ePTFE sealing cord is a cost-effective solution for large steel flanges in general-use applications. It is a time-tested sealing solution for steel flanges with large diameters, rectangular or irregular shapes and rough or pitted surfaces. When compressed, this soft, conformable cord forms a thin yet strong seal. It can also seal applications where available bolt loads are low. Versatile GORE® joint sealant is standard sealing material for many MRO (Maintenance, Repair and Operations) teams because it seals reliably and because it's easy and cost-effective to install. For most applications, just peel off the adhesive backing, apply to the surface and overlap the ends.
- Chemical resistance to all media pH 0-14, except molten alkali metals and elemental fluorine
Applications: For large/non-standard steel equipment flanges, tank manways, ductwork, housing covers, chemical processing, pulp and paper, mining and minerals, semi-conductor manufacturing, power generation
BAM Approved|DVGW Approved|ISO 9001 Specified|TA-Luft Approved
-
Cut sheet
https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/GORE_0015F_SS.pdf
-
Installation Instructions
https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/GORE_0015F_II.pdf
