1. pin-int

GORE® 0015H PTFE Joint Sealant, 15 ft, 145 psi

GORE® 0015H

  • Manufacturers: W. L. Gore & Associates
  • Brand Name: GORE®
  • ARGPN: 3/4 GORJX15
  • MPN: 0015H
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Branch Availability: loading
  • Total Availability: loading
  • Availability: Typically Ships in 3-5 days

GORE® Joint Sealant, 15 ft Length, 3/4 in Width, -452 to 600 deg F, 145 psi, Material Construction: PTFE

Length      :      15 ft
Material      :      PTFE
Material Construction      :      PTFE
Pressure Rating      :      145 psi
Product Type      :      Joint Sealant
Temperature Rating      :      -452 to 600 deg F
Width      :      3/4 in

GORE® joint sealant is versatile and easy-to-install, this 100% ePTFE sealing cord is a cost-effective solution for large steel flanges in general-use applications. It is a time-tested sealing solution for steel flanges with large diameters, rectangular or irregular shapes and rough or pitted surfaces. When compressed, this soft, conformable cord forms a thin yet strong seal. It can also seal applications where available bolt loads are low. Versatile GORE® joint sealant is standard sealing material for many MRO (Maintenance, Repair and Operations) teams because it seals reliably and because it's easy and cost-effective to install. For most applications, just peel off the adhesive backing, apply to the surface and overlap the ends.

  • Chemical resistance to all media pH 0-14, except molten alkali metals and elemental fluorine

Applications: For large/non-standard steel equipment flanges, tank manways, ductwork, housing covers, chemical processing, pulp and paper, mining and minerals, semi-conductor manufacturing, power generation

Prop Warning BAM Approved|DVGW Approved|ISO 9001 Specified|TA-Luft Approved

  • pdfCut sheet https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/GORE_0015F_SS.pdf
  • pdfInstallation Instructions https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/GORE_0015F_II.pdf