3% Off All Online Orders Over $100.00

Gates® 90520062

Gates® Hi-Power® V80® 9052 Heavy-Duty Double V-Belt, 65.48 in, AA Section, 0.51 in W, 0.41 in Thick

  • Manufacturer: Gates Corp
  • Brand: Gates®
  • ARGPN: AA-62
  • MPN: 90520062
  • ARG Industrial Available for delivery: loading
  • ARG Industrial Available for pickup at Anchorage, AK Branch: loading
  • Sold As: 80/PK
  • loading
  • Add to cart
  1. pin-int

Gates® Hi-Power®, V80® Heavy-Duty Double V-Belt, Series: 9052, V-Belt Section: AA, Outer Circumference: 65.48 in, 1 -Rib, Construction: Two-Belt Dubl-V, 0.51 in Width, 0.41 in Thickness, Material Construction: Gates Proprietary Compound, -22 to 140 deg F

Construction      :      Two-Belt Dubl-V
Material Construction      :      Gates Proprietary Compound
Number of Ribs      :      1
Outer Circumference      :      65.48 in
Product Type      :      V-Belt
Series      :      9052
Sub Brand      :      Hi-Power®, V80®
Temperature Rating      :      -22 to 140 deg F
Thickness      :      0.41 in
V-Belt Section      :      AA
Width      :      0.51 in

Gates® Hi-Power® Double-V belt is designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt. Use this Gates solution for all industrial serpentine applications that require rotation reversal on some driven shafts. It uses flex-bonded tensile cords, which are highly resistant to flexing forces and a protective Flex-Weave® cover. It is the ideal solution for "serpentine" drives (drives with counter rotating shafts) where power is transmitted from both the top and the bottom of the belts.

  • Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life
  • Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
  • The Flex-Weave® cover is a patented construction for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
  • Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX
  • Meets Gates UNISET tolerances, they can be installed without matching
  • Meets RMA oil and heat-resistant standards and static conductivity requirements
  • Lower transmission from both sides of the belt

Applications: Suitable for all industrial serpentine applications requiring rotation reversal on some driven shafts, for dirty/dusty environments

Safety Notes: Double-V belts are available in AA, BB, CC and DD cross sections.

  • pdfCatalog https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Gates_90520062_CAT.pdf

Similar items