3% Off All Online Orders Over $100.00
Location Currently Shopping: Anchorage, AK Branch
Dixon® TP48 TP48

Dixon® TP48

Dixon® Holedall™ TP48 Carbon Steel Beveled End Welding Stem, 3 in

  • Manufacturer: Dixon Valve & Coupling
  • Brand: Dixon®
  • ARGPN: TP48
  • MPN: TP48
  • ARG Industrial Available for delivery: loading
  • ARG Industrial Available for pickup at Anchorage, AK Branch: loading
  • loading
  • Add to cart
Add To Favorites
  1. pin-int

Dixon® Holedall™ Welding Stem, Connection Type 1: Hose, Connection Size 1: 3 in, Hose Dash Size: 48, Connection Type 2: Beveled End, Connection Size 2: 3 in, Nominal Size: 3 in, 600 psi, Material Construction: Carbon Steel

California residents see Prop 65 WARNINGS

Connection Size 1      :      3 in
Connection Size 2      :      3 in
Connection Type      :      Hose~Other
Connection Type 1      :      Hose
Connection Type 2      :      Beveled End
Fitting Type      :      Stem
Hose Dash Size      :      48
Material      :      Steel
Material Construction      :      Carbon Steel
Nominal Size      :      3 in
Pressure Rating      :      600 psi
Shape      :      Stem
Sub Brand      :      Holedall™
  • Tubular-type
  • The coupling system requires no bolts and results in a clean coupling with no protrusions
  • The Holedall coupling provides long-lasting efficiency and safety

Safety Notes: Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system.

  • Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon® Holedall products.
  • Do not use a wrench or vice on ferrule.
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure.
  • Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations.
  • Consult Dixon® for recommendations on usage.
  • Externally swaged Holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD.
  • Dixon's die and ferrule recommendation guide is to be used to select correct dies and ferrules.
  • Consult Dixon® if you do not have an updated die and ferrule recommendation guide.
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting.
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.
  • Media being transported through the hose should be compatible with the stem material. Compatibility of ferrule material with the environment in which it will be used is recommended.
  • Consult the compatibility chart or contact Dixon® for material compatibility.
  • For applications other than the ones list, please consult Dixon.

    Applications: Recommended for use on most one and two wire braid reinforced hoses, fiber reinforced (braided or spiraled) with or without helical wire such as: oil and suction discharge hose, barge and dock loading and unloading hose as well as LP gas hose, anhydrous ammonia hose, acid chemical hose and air and water hose

    • pdfCatalog https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_10WSDPA_CAT.pdf
    • pdfCut Sheet https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_TP48_SS.pdf

    Similar items