3% Off All Online Orders Over $100.00
Location Currently Shopping: Anchorage, AK Branch
Dixon® G5242 G5242

Dixon® G5242

Dixon® Holedall™ G5242 Brass Scovill Style Permanent Coupling, 2 in Hose x 2 in Grooved

  • Manufacturer: Dixon Valve & Coupling
  • Brand: Dixon®
  • ARGPN: G5242
  • MPN: G5242
  • ARG Industrial Available for delivery: loading
  • ARG Industrial Available for pickup at Anchorage, AK Branch: loading
  • loading
  • Add to cart
Add To Favorites
  1. pin-int

Dixon® Holedall™ Scovill Style Permanent Coupling, Connection Type 1: Hose, Connection Size 1: 2 in, Connection Type 2: Grooved, Connection Size 2: 2 in, Material Construction: Brass, 3 in Diameter, 3-1/8 in Length

California residents see Prop 65 WARNINGS

Connection Size 1      :      2 in
Connection Size 2      :      2 in
Connection Type 1      :      Hose
Connection Type 2      :      Grooved
Diameter      :      3 in
Length      :      3-1/8 in
Material      :      Brass
Material Construction      :      Brass
Shape      :      Coupling
Sub Brand      :      Holedall™
  • Couplings are compact, light and streamlined to eliminate catching on curbs and shrubs
  • The stem is expanded to nominal ID of hose for a rigid, uniform, full-flow area
  • Couplings are pre-lubricated for assembly
  • Stems are machined from bar stock or solid brass forgings
  • Designed for internal expansion only

Safety Notes: Do not interchange with other manufacturer's fittings.

  • Designed for internal expansion only.
  • Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system.
  • Do not use a wrench or vice on ferrule.
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure.
  • Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations.
  • Consult Dixon® for recommendations on usage.
  • Strict adherence to ferrule OD range (Internally Expanded) for each hose end to be assembled is essential for satisfactory performance.
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting.
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.
  • Media being transported through the hose should be compatible with the stem material.
  • Compatibility of ferrule material with the environment in which it will be used is recommended.
  • Consult the compatibility chart or the Dixon® factory for material compatibility.
  • For applications other than the ones list, please consult Dixon.

    Applications: Recommended for discharge and suction service and commonly used in the transfer of fuel to homes, airplanes, ships, etc.

    • pdfCatalog https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_10WSDPA_CAT.pdf
    • pdfCut Sheet https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_G5242_SS.pdf
    • pdfTechnical Drawing/Parts Diagram https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_G5242_TD.pdf

    Similar items