Dixon® DM46

Dixon® DM46 Zinc-Plated Steel Hose Mender, 4 in Hose Barb

  1. pin-int

Dixon® Hose Mender, Connection Type 1: Hose Barb, Connection Size 1: 4 in, Connection Type 2: Hose Barb, Connection Size 2: 4 in, Material Construction: Steel, Finish: Zinc-Plated, 7-3/8 in Length

California residents see Prop 65 WARNINGS

Connection Size 1      :      4 in
Connection Size 2      :      4 in
Connection Type 1      :      Hose Barb
Connection Type 2      :      Hose Barb
Finish      :      Zinc-Plated
Length      :      7-3/8 in
Material      :      Steel
Material Construction      :      Steel
Shape      :      Hose Mender

Safety Notes: Menders are not for compressible products such as air, nitrogen or steam.

  • The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
  • Consult Dixon® for recommendations.
  • In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for 15 min without leaking or coupling movement.
  • For additional information and detailed instructions on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
    • pdfCatalog https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_DM18_CAT.pdf
    • pdfCut Sheet https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_DM18_SS.pdf
    • pdfTechnical Drawing/Parts Diagram https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_DM46_TD.pdf