3% Off All Online Orders Over $100.00

Crosby® 2701669

Crosby® IPU10 Welded Alloy Steel Vertical Lifting Clamp, 6 ton, Vertical Lifting Point

  1. pin-int

Crosby® Vertical Lifting Clamp, Series: IPU10, Maximum Working Load: 6 ton, Lifting Point: Vertical, Jaw Capacity: 0 - 2 in, Material Construction: Welded Alloy Steel, Dimensions: 525 mm L x 292 mm W

Dimensions      :      525 mm L x 292 mm W
Jaw Capacity      :      0 - 2 in
Lifting Point      :      Vertical
Material      :      Steel
Material Construction      :      Welded Alloy Steel
Maximum Working Load      :      6 ton
Product Type      :      Vertical Lifting Clamp
Series      :      IPU10

The IPU10 vertical lifting clamp is used for lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180 deg) as needed. The hinged hoisting eye allows for the clamp to place and lift the load from any direction, or with a multiple leg sling without side-loading the clamp.

  • Individually-proof tested to 2 times the working load limit with certification
  • Company name (CrosbyIP), logo, working load limit and jaw opening permanently stamped on body
  • Each product is individually serialized, with the serial number and proof load test date stamped on body
  • User manual with test certificate is included with each clamp
  • Full 180 deg turning range for material transfer, turning or moving
  • Lock open, lock closed ability with latch for pretension on material and then release of material

Applications: For lifting, turning moving or vertical transfer of sheets, plates and fabrication from horizontal to vertical and down to horizontal

  • pdfCatalog https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Crosby_2701663_CAT_NEW2021.pdf

Similar items