1. pin-int

Permatex® 64000 Green High-Temperature Sleeve Retainer, 6 mL Tube

Permatex® 64000

  • Manufacturers: ITW Polymers Adhesives
  • Brand Name: Permatex®
  • ARGPN: PTX 64000
  • MPN: 64000
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Branch Availability: loading
  • Total Availability: loading
  • Availability: Typically Ships in 3-5 days
  • Prop WarningCalifornia residents see Prop 65 WARNINGS

Permatex® High-Temperature Sleeve Retainer, Container Size: 6 mL, Container Type: Tube, Liquid, Green, Irritating, Composition: Dimethylbenzyl Hydroperoxide, Acrylic Acid, Cumene, Curing Time: 24 hr, Specific Gravity: 1.12, Flash Point: 100 deg C, VOC Content: 3.62 %, Viscosity: 500 - 700 cPs, -65 to 400 deg F, Flammability Rating: 1

Color      :      Green
Composition      :      Dimethylbenzyl Hydroperoxide, Acrylic Acid, Cumene
Container Size      :      6 mL
Container Type      :      Tube
Curing Time      :      24 hr
Flammability Rating      :      1
Flash Point      :      100 deg C
Form      :      Liquid
Odor/Scent      :      Irritating
Product Type      :      Sleeve Retainer
Specific Gravity      :      1.12
Temperature Rating      :      -65 to 400 deg F
VOC Content      :      3.62 %
Viscosity      :      500 - 700 cPs

Permatex® high-temperature sleeve retainer is a one-component, solvent-free, fast curing, anaerobic adhesive/sealant. It is a green-colored liquid resin that hardens and cures in the absence of air. Permatex® high-temperature sleeve retainer self-hardens into a tough plastic material when it is confined between close-fitting metal parts. The cured adhesive is a thermoset plastic suitable for exposure to most solvents and engine fluids. OEM specified. High-temperature, up to 400 deg F (204 deg C), anaerobic adhesive that secures slip and press fit assemblies. Adds up to 3000 psi holding power. Restores fit to worn or out-of-tolerance assemblies. Prevents surface corrosion.

  • No mixing
  • No curing outside of joint
  • No on-torque adjustments needed
  • Restores fit to worn assemblies
  • Prevents fretting and corrosion
  • Allows the use of slip fit or press fit
  • For use on assemblies with gaps up to 0.007 in diameter

Applications: For cylinder sleeves, valve seats, bearings and bushings, woodruff keys, liner assemblies, valve guides

Prop Warning ASTM D5363 AN0411|Mil-R-46082 Type II Specified|Prop65 Warning: This product contains lead and other chemicals which are known to the state of California to cause cancer and birth defects or other reproductive harm @www.P65Warnings.ca.gov

  • pdfCut sheet https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Permatex_64000_SS.pdf
  • pdfSDS https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Permatex_64000_SDS.pdf