Dixon® Pneumatic Manual Industrial Interchange Coupler, Series: F, Connection Type 1: Quick Disconnect, Connection Size 1: 1/4 in, Connection Type 2: NPTF, Gender 2: Female, Connection Size 2: 1/4 in, Thread Size 2: 1/4-18, 500 psi, Material Construction: 303 Stainless Steel, Dimensions: 2.07 in L, -40 to 250 deg F
Connection Size 1 |
: |
1/4 in |
Connection Size 2 |
: |
1/4 in |
Connection Type 1 |
: |
Quick Disconnect |
Connection Type 2 |
: |
NPTF |
Dimensions |
: |
2.07 in L |
Gender 2 |
: |
Female |
Material |
: |
Stainless Steel |
Material Construction |
: |
303 Stainless Steel |
Pressure Rating |
: |
500 psi |
Series |
: |
F |
Shape |
: |
Coupler |
Temperature Rating |
: |
-40 to 250 deg F |
Thread Size 2 |
: |
1/4-18 |
- Machined components are manufactured using solid bar stock
- Stainless steel balls, retaining rings and spring maximize corrosion resistance and extend service life
- Nitrile (Buna-N) seals are standard
- Steel componentry is plated using RoHS compliant trivalent chrome
- Steel sleeve and steel tubular valve
- Foster 3, 4, 5 and 6 Series
- Parker 20 Series manual interchange
- Hansen 1000, 400 and 500
Safety Notes: It is important to be safe when installing quick disconnect couplings into a pneumatic circuit.
Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18 in long, between the tool and the coupling, to prevent damage to the coupling.To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
Prop65 Warning: This product contains lead and other chemicals which are known to the state of California to cause cancer and birth defects or other reproductive harm @www.P65Warnings.ca.gov
-
Catalog
https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_2DF2-S_CAT.pdf