Dixon® 4PS6

Dixon® Dual-Lock™ P Series Plated Steel Thor Interchange Coupler, 1/2 in Quick Disconnect x 3/4 in Hose Barb

Manufacturer: Dixon Valve & Coupling
Brand: Dixon®
ARGPN: 4PS6

MPN: 4PS6

Available for delivery:
Available for pickup at Anchorage, AK Branch:
Add to cart

Description
Specs
Features
Documents
Videos

Dixon® Dual-Lock™ Thor Interchange Coupler, Series: P, Connection Type 1: Quick Disconnect, Connection Size 1: 1/2 in, Connection Type 2: Hose Barb, Connection Size 2: 3/4 in, 300 psi, Material Construction: Steel, Finish: Plated, Dimensions: 1.55 in Dia x 3.95 in L, -40 to 250 deg F

California residents see Prop 65 WARNINGS

Connection Size 1	:	1/2 in
Connection Size 2	:	3/4 in
Connection Type 1	:	Quick Disconnect
Connection Type 2	:	Hose Barb
Dimensions	:	1.55 in Dia x 3.95 in L
Finish	:	Plated
Material	:	Steel
Material Construction	:	Steel
Pressure Rating	:	300 psi
Series	:	P
Shape	:	Coupler
Sub Brand	:	Dual-Lock™
Temperature Rating	:	-40 to 250 deg F

Machined components are manufactured using solid bar stock
Nitrile (Buna-N) seals are standard
Stainless steel retaining ring and spring maximize corrosion resistance and extend service life on the 1-piece sleeve
2-piece sleeve has a phosphor bronze spring
Steel componentry is plated using RoHS compliant trivalent chrome
Zinc cast sleeve
Thor Finger-Lock interchange
Interchanges with National A-type, Campbell double-lock and Thor PHC Series couplings

Applications: For utility air, water and nitrogen lines

Safety Notes: Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and hose end connection combination.

Consult hose manufacturer's catalog for hose end connection ratings.

If in doubt, test under controlled conditions for suitability to application.

Dixon® cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and personal injury including death.

It is important to be safe when installing quick disconnect couplings into a pneumatic circuit.

Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18 in long, between the tool and the coupling, to prevent damage to the coupling.

To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.