3% Off All Online Orders Over $100.00
Location Currently Shopping: Anchorage, AK Branch
Loctite® 1324007 LOC 1324007

Loctite® 1324007

Loctite® Fixmaster® Poxy Pak™ EA 9017™ Clear/Amber/Translucent General-Purpose Twin Syringe Epoxy Adhesive, 1 oz, Syringe, Clear Part A, Amber, Translucent Part B

Add To Favorites
  1. pin-int

Loctite® Fixmaster® Poxy Pak™ General-Purpose Twin Syringe Epoxy Adhesive, Series: EA 9017™, Container Size: 1 oz, Container Type: Syringe, Liquid Part A and Part B, Clear/Amber/Translucent, Mild Part A, Amine, Mercaptan Part B, Composition: Part A: Epichlorohydrin-4,4'-Isopropylidene Diphenol Resin; Part B: Poly[oxy(Methyl-1,2-Ethanediyl)], a-Hydrow-Hydroxy-, Ether with 2,2-bis(Hydroxymethyl)-1,3-Propanediol (4:1), 2-Hydroxy-3-Mercaptop, m-Phenylenebis (Methylamine), Curing Time: 40 - 60 min, Specific Gravity: 1.04 Part B, Flash Point: 249 Part A, >93 Part B deg C, Mixing Ratio: 1:1, VOC Content: 0.38 Part B g/L, Up to 300 Part A and Part B deg F

Color      :      Clear/Amber/Translucent
Composition      :      Part A: Epichlorohydrin-4,4'-Isopropylidene Diphenol Resin; Part B: Poly[oxy(Methyl-1,2-Ethanediyl)], a-Hydrow-Hydroxy-, Ether with 2,2-bis(Hydroxymethyl)-1,3-Propanediol (4:1), 2-Hydroxy-3-Mercaptop, m-Phenylenebis (Methylamine)
Container Size      :      1 oz
Container Type      :      Syringe
Curing Time      :      40 - 60 min
Flash Point      :      249 Part A, >93 Part B deg C
Form      :      Liquid Part A and Part B
Mixing Ratio      :      1:1
Odor/Scent      :      Mild Part A, Amine, Mercaptan Part B
Product Type      :      Epoxy Adhesive
Series      :      EA 9017™
Specific Gravity      :      1.04 Part B
Sub Brand      :      Fixmaster® Poxy Pak™
Temperature Rating      :      Up to 300 Part A and Part B deg F
VOC Content      :      0.38 Part B g/L

Loctite® EA 9017™ (known as Fixmaster® Fast Cure Poxy Pak™ Epoxy) is a two-part, room-temperature curing epoxy adhesive used for high-strength, permanent bonding of metals, ceramics, concrete, wood, glass and most plastics. This product can withstand temperatures up to 300 deg F (149 deg C).

  • Premeasured resin and hardener for easy application, consistent strength and time savings - no waste, no mess, no clumping
  • Bonds virtually any material
  • Repair, fill and seal holes, cracks and worn surfaces
  • May be drilled, tapped, sanded or machined and painted after cure
  • Reaches handling strength in 4 - 6 min, fully cures in 45 - 60 min
  • Easy to use in a syringe applicator

Applications: For use in high-strength, permanent bonding of metals, ceramics, concrete, wood, glass and most plastics

  • pdfSDS 1 https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Loctite_1324007_SDS_1.pdf
  • pdfSDS https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Loctite_1324007_SDS.pdf

Similar items