1. pin-int

Kingston Valves 296 Brass Low Flow Vertical Bottom Cylinder Side-Port Air Control Valve, 1/4 in NPT, 150 psi

Kingston Valves 296-2

  • Manufacturers: Strom Manufacturing Group
  • Brand Name: Kingston Valves
  • ARGPN: 296-2
  • MPN: 296-2
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Branch Availability: loading
  • Total Availability: loading
  • Availability: Typically Ships in 3-5 days

Kingston Valves Low Flow Vertical Bottom Cylinder Side-Port Air Control Valve, Series: 296, Nominal Size: 1/4 in, Connection Type: NPT, Material Construction: Brass, Brass Trim, Buna-N Seal, 2-3/16 in Height, 3-25/32 in Width, 150 psi

Connection Type      :      NPT
Height      :      2-3/16 in
Material      :      Brass
Material Construction      :      Brass
Nominal Size      :      1/4 in
Pressure Rating      :      150 psi
Product Type      :      Control Valve
Seal Material      :      Buna-N
Series      :      296
Trim Material      :      Brass
Width      :      3-25/32 in

Kingston model 296 air control valve is a "two step" valve designed for operating single acting cylinders such as those found on lifting devices. It features durable brass construction with Buna-N seals. Inlet stem is designed to provide restricted flow on initial opening with full flow achieved when fully open. Model 296-2 has a vertical bottom cylinder port and comes standard with a 1/8 in tank valve, providing a second means to pressurize the cylinder by using a tire chuck without actuating the lever. Maximum operating pressure, 150 psi. A "two step" valve is operates when compressed air is directed through-the inlet side, or "first step" of the valve to the cylinder port, the cylinder is extended. As long as the lever remains in the neutral position, the air pressure in the cylinder holds the piston extended. When the exhaust port, or "second step” is opened, the air pressure is exhausted to atmosphere, allowing the load on the cylinder to return the piston to its "rest” position. The design of the Kingston model 296-2 air control valve differs from the 292-2 only in the position of the cylinder port.

  • Inlet stem is designed to provide restricted flow on initial opening with full flow achieved when fully opened
  • Providing a second means to pressurize the cylinder by using a tire chuck without actuating the lever
  • Models 292-2 and 296-2 designs differ only in the position of the cylinder port
  • "Two-step" valve design for operating single acting cylinders
  • pdfCut sheet https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Kingston Valves_296-2_SS.pdf