3% Off All Online Orders Over $100.00

Dixon® N4S6

Dixon® Dix-Lock™ N Series Trivalent Chrome-Plated Steel Interchange Plug, 1/2 in Male Quick Disconnect x 3/4 in Hose Barb

  1. pin-int

Dixon® Dix-Lock™ Interchange Plug, Series: N, Connection Type 1: Quick Disconnect, Gender 1: Male, Connection Size 1: 1/2 in, Connection Type 2: Hose Barb, Connection Size 2: 3/4 in, Material Construction: Steel, Finish: Trivalent Chrome-Plated, Dimensions: 1.4 in OD x 4.95 in L, -40 to 250 deg F

California residents see Prop 65 WARNINGS

Connection Size 1      :      1/2 in
Connection Size 2      :      3/4 in
Connection Type 1      :      Quick Disconnect
Connection Type 2      :      Hose Barb
Dimensions      :      1.4 in OD x 4.95 in L
Finish      :      Trivalent Chrome-Plated
Gender 1      :      Male
Material      :      Steel
Material Construction      :      Steel
Series      :      N
Shape      :      Plug
Temperature Rating      :      -40 to 250 deg F
  • Machined components are manufactured using solid bar stock
  • Stainless steel retaining ring and spring maximize corrosion resistance and extend service life
  • Steel componentry is plated using RoHS compliant trivalent chrome
  • Coupling sleeve constructed of cast zinc steel
  • Conforms to MIL-C-3486 and A-A-50431A standards
  • Bowes interchange bayonet style
  • Interchangeable with Bowes 51000 Series, National Series 'B', MacDonald quick action, Campbell single-lock

Safety Notes:

  • Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and hose end connection combination.
  • Consult hose manufacturer's catalog for hose end connection ratings.
  • If in doubt, test under controlled conditions for suitability to application.
  • Dixon® cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and personal injury including death.
  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit.
  • Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18 in long, between the tool and the coupling, to prevent damage to the coupling.
  • To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
  • pdfCatalog https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_4NS3_CAT.pdf

Similar items