Dixon® Compression Air Brake Nut, Connection Type 1: Tube, Connection Size 1: 3/16 in, Connection Type 2: NPT, Gender 2: Male, Connection Size 2: 5/16 in, Thread Size 2: 5/16-24, Hex Size: 7/16 in, 150 psi, Material Construction: Brass, Dimensions: 0.4 in L, Dimension Standards: SAE J246, SAE 100110, -40 to 200 deg F, For Use With: SAE J844 Type A and B Tubing
Connection Size 1 |
: |
3/16 in |
Connection Size 2 |
: |
5/16 in |
Connection Type 1 |
: |
Tube |
Connection Type 2 |
: |
NPT |
Dimension Standards |
: |
SAE J246, SAE 100110 |
Dimensions |
: |
0.4 in L |
For Use With |
: |
SAE J844 Type A and B Tubing |
Gender 2 |
: |
Male |
Hex Size |
: |
7/16 in |
Material |
: |
Brass |
Material Construction |
: |
Brass |
Pressure Rating |
: |
150 psi |
Shape |
: |
Nut |
Temperature Rating |
: |
-40 to 200 deg F |
Thread Size 2 |
: |
5/16-24 |
- Positive grip
- Machined from CA260, CA345 or CA377 brass
- Utilize ribbed sleeve for compression and positive grip
Instructions: Cut tubing squarely maximum of 15 deg angle allowable.
Check that port or mating part is clean and free of debris.Insert tubing into fittings until it bottoms on seat.Tighten nut with wrench until one thread remains visible on the fittings body, (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrench tightened according to the tube size used.Applications: For use in air brake systems or cab controls
DOT FMVSS 571.106 Approved | Prop65 Warning: This product contains lead and other chemicals which are known to the state of California to cause cancer and birth defects or other reproductive harm @www.P65Warnings.ca.gov
-
Catalog
https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_60NAB3_CAT.pdf
-
Cut Sheet
https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_61NAB3_SS.pdf
-
SDS
https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_61NAB3_SDS.pdf