Dixon® Nipple, Series: 3500, Connection Type 1: Hose Barb, Connection Size 1: 1/4 in, Connection Type 2: NPT, Gender 2: Male, Connection Size 2: 1/8 in, Thread Size 2: 1/8-27, Hex Size: 9/16 in, 600 psi, Material Construction: Steel, Finish: Zinc-Plated, 2-1/4 in Length, 70 deg F
Connection Size 1 |
: |
1/4 in |
Connection Size 2 |
: |
1/8 in |
Connection Type 1 |
: |
Hose Barb |
Connection Type 2 |
: |
NPT |
Finish |
: |
Zinc-Plated |
Gender 2 |
: |
Male |
Hex Size |
: |
9/16 in |
Length |
: |
2-1/4 in |
Material |
: |
Steel |
Material Construction |
: |
Steel |
Pressure Rating |
: |
600 psi |
Series |
: |
3500 |
Shape |
: |
Nipple |
Temperature Rating |
: |
70 deg F |
Thread Size 2 |
: |
1/8-27 |
- The constant vibration created by air tools, like air drills and pavement breakers, is destructive to air hose couplings, especially the quick-acting type
- To provide protection against coupling breakage and related hazards, Dixon recommends the use of a whip hose
- To construct a whip hose, connect one end of a short (3 to 10 ft) air hose to the air tool using a 3500 type steel nipple
- Connect the other end of the hose to the air supply using the standard quick-acting coupling
- The heat treated 3500 nipple will withstand vibration far better than the standard coupling and provide a safer connection
- The whip hose should remain permanently connected to the tool
Safety Notes: For air and water service only.
To provide protection against coupling breakage and related hazards, Dixon® recommends the use of a whip hose.
Prop65 Warning: This product contains lead and other chemicals which are known to the state of California to cause cancer and birth defects or other reproductive harm @www.P65Warnings.ca.gov
-
Catalog
https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_H5076BU_CAT.pdf
-
Cut Sheet
https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_3501_SS.pdf
-
Technical Drawing/Parts Diagram
https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_3501_TD.pdf