Dixon® DM1 DM1

Dixon® DM1 Zinc-Plated Steel Hose Mender, 1/2 in Hose Barb

  1. pin-int

Dixon® Hose Mender, Connection Type 1: Hose Barb, Connection Size 1: 1/2 in, Connection Type 2: Hose Barb, Connection Size 2: 1/2 in, Material Construction: Steel, Finish: Zinc-Plated, 17/32 in Diameter, 3 in Length

California residents see Prop 65 WARNINGS

Connection Size 1      :      1/2 in
Connection Size 2      :      1/2 in
Connection Type 1      :      Hose Barb
Connection Type 2      :      Hose Barb
Diameter      :      17/32 in
Finish      :      Zinc-Plated
Length      :      3 in
Material      :      Steel
Material Construction      :      Steel
Shape      :      Hose Mender

Safety Notes: Menders are not for compressible products such as air, nitrogen or steam.

  • The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
  • Consult Dixon® for recommendations.
  • In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for 15 min without leaking or coupling movement.
  • For additional information and detailed instructions on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
    • pdfCatalog https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_USW_CAT.pdf
    • pdfCut sheet https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_DM100_SS.pdf
    • pdfTechnical Drawing/Parts Diagram https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_DM1_TD.pdf