Stucchi 805204017

Stucchi APM Carbon Steel Flat Face Interchange Nipple, 1 in Quick Connect x 1-1/4 in Female SAE Threaded

  1. pin-int

Stucchi Flat Face Interchange Nipple, Series: APM, Connection Type 1: Quick Connect, Connection Size 1: 1 in, Connection Type 2: SAE Threaded, Gender 2: Female, Connection Size 2: 1-1/4 in, Hex Size: 2.17 in, 14500 psi Burst, Material Construction: Carbon Steel, Dimensions: 4.86 in L x 2.35 in W, Dimension Standards: ISO 16028, -20 to 100 deg C

Connection Size 1      :      1 in
Connection Size 2      :      1-1/4 in
Connection Type 1      :      Quick Connect
Connection Type 2      :      SAE Threaded
Dimension Standards      :      ISO 16028
Dimensions      :      4.86 in L x 2.35 in W
Gender 2      :      Female
Hex Size      :      2.17 in
Material      :      Steel
Material Construction      :      Carbon Steel
Pressure Rating      :      14500 psi Burst
Series      :      APM
Shape      :      Nipple
Temperature Rating      :      -20 to 100 deg C

The APM Series Flat Face couplings are state-of-the-art solutions for high residual pressure. They address residual pressure in a circuit anywhere thermal expansion of trapped fluid causes pressure to develop and connect by hand with residual pressure, without releasing any fluid into the environment. The APM is intended to relieve pressure within itself only.

  • Relieves pressure within itself only
  • Connect under high pressure, by hand
  • Flat face design eliminates leakage and contamination in the circuit
  • Male body black zinc-plated for identification
  • NBR seal
  • Connection under residual pressure is allowed in one side and the internal valve system allows an easy connection
  • Flat face is easy to clean, reducing the inclusion of contamination to the hydraulic circuit
  • Minimal fluid loss during disconnection, reducing fluid loss to the environment
  • Minimal air inclusion during connection/disconnection
  • Internal pressure release valve system allows manual connection with high internal residual pressure
  • Patented internal valve design creates minimal pressure drop, maintaining circuit efficiency in the system
  • The modular design allows flexibility with a wide range of configurations
  • Good resistance at impulse pressures
  • Compact slim design
  • Safe and simple to use

Applications: For mobile equipment and attachment tools, where sun exposure/temperature change causes pressure due to thermal expansion of trapped fluid, any application where static pressure can get locked into the system

  • pdfCatalog
  • pdfCut Sheet