Dixon® Dix-Lock™ N Series Trivalent Chrome-Plated Steel Pneumatic Interchange Coupler, 1/2 in Female Quick Disconnect x 3/4 in Hose Barb

Dixon® Dix-Lock™ Pneumatic Interchange Coupler, Series: N, Connection Type 1: Quick Disconnect, Gender 1: Female, Connection Size 1: 1/2 in, Connection Type 2: Hose Barb, Connection Size 2: 3/4 in, 500 psi, Material Construction: Steel, Finish: Trivalent Chrome-Plated, Dimensions: 3.37 in L, -40 to 250 deg F

• Machined components are manufactured using solid bar stock
• Nitrile (Buna-N) seals are standard
• Steel componentry is plated using RoHS compliant trivalent chrome
• Bowes interchange bayonet style
• Interchangeable with Bowes 51000 Series, National Series 'B', MacDonald quick action, Campbell single-lock
• Low profile prevents hose snags

Safety Notes:

• Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and hose end connection combination.
• Consult hose manufacturer's catalog for hose end connection ratings.
• If in doubt, test under controlled conditions for suitability to application.
• Dixon® cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and personal injury including death.
• It is important to be safe when installing quick disconnect couplings into a pneumatic circuit.
• Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18 in long, between the tool and the coupling, to prevent damage to the coupling.
• To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Mil-A-A-50431A/C-3486 Specified|Prop65 Warning: This product contains lead and other chemicals which are known to the state of California to cause cancer and birth defects or other reproductive harm @www.P65Warnings.ca.gov

• Catalog https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_4NS3_CAT.pdf